L3 cache varies with CPU
Dual channel memory architecture
Support for DDR4 2666/2400/2133 MHz memory modules
Support for ECC Un
-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non
-ECC mode)
Support for non
-ECC Un
-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
* To support 2666 MHz or XMP memory, you must install an 8th Generation Intel® Core™ i7/i5 processor.
1 x DVI
-D port, supporting a maximum resolution of 1920x1200@60 Hz
* The DVI
-D port does not support D
-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 4096x2160@30 Hz
* Support for HDMI
1.4 version and HDCP
2.
2.
Support for up to 3 displays at the same time
Maximum shared memory of 1 GB
High Definition Audio
2/4/
5.1/
7.1
-channel
Support for S/PDIF Out
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
1 x PCI Express x16 slot, running at x4 (PCIEX4)
4 x PCI Express x1 slot
(All of the PCI Express slots conform to PCI Express
3.0 standard.)
1 x PCI slot
1 x M.2 Socket 1 connector for an Intel® CNVi wireless module only (CNVI)
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x2 SSD support) (M2P_16G)
6 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, RAID 5, and RAID 10
* Refer to "1
-7 Internal Connectors," for the installation notices for the M.2 and SATA connectors.
Intel® Optane™ Memory Ready
1 x USB
3.1 Gen 2 Type
-A port (red) on the back panel
6 x USB
3.1 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header)
6 x USB
2.0/
1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
* The CNVi connector shares bandwidth with the F_USB2 header. When a Wi
-Fi module is populated in the CNVi connector, one of the USB
2.0/
1.1 ports routed to the F_USB2 header becomes unavailable.
1 x 8
-pin ATX 12V power connector
1 x CPU fan header
3 x system fan headers
1 x RGB LED strip header
6 x SATA 6Gb/s connectors
2 x M.2 Socket 3 connectors
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB
3.1 Gen 1 header
2 x USB
2.0/
1.1 headers
1 x Thunderbolt™ add
-in card connector
1 x Trusted Platform Module (TPM) header (2x6 pin, for the GC
-TPM
2.0_S module only)
1 x parallel port header
1 x serial port header
1 x Clear CMOS jumper
1 x D
-Sub port
1 x DVI
-D port
1 x HDMI port
1 x USB Type
-C™ port, with USB
3.1 Gen 1 support
1 x USB
3.1 Gen 2 Type
-A port (red)
4 x USB
3.1 Gen 1 ports
2 x USB
2.0/
1.1 ports
1 x RJ
-45 port
6 x audio jacks
Temperature detection
Fan speed detection
Overheating warning
Fan fail warning
Fan speed control
* Whether the fan speed control function is supported will depend on the cooler you install.
Use of licensed AMI UEFI BIOS
Support for DualBIOS™
PnP
1.0a, DMI
2.7, WfM
2.0, SM BIOS
2.7, ACPI
5.0
* Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
3D OSD
@BIOS
AutoGreen
Cloud Station
EasyTune
Easy RAID
Fast Boot
Game Boost
ON/OFF Charge
Platform Power Management
RGB Fusion
Smart Backup
Smart Keyboard
Smart TimeLock
Smart HUD
System Information Viewer
USB Blocker
V
-Tuner
Support for Q
-Flash
Support for Xpress Install
cFosSpeed